C-Shaped Guide Rail Universal Good

- Jul 20, 2017-

C-section Guide locking the structure of the Assembly, including medium pressure code, fixed bolts, middle pressure code central set with a through hole, fixed bolt one end is provided with a rectangular head, the fixed bolt from the rectangular head start in turn set with U-shaped parts, flat pad, C-Beam Linear Rail spring and medium pressure code, and a flange nut is arranged on one side of the middle pressure code away from the rectangular head, and the U-shaped part openings are arranged on the rectangular head; a spring on the fixing bolt is arranged to produce a certain pretension force for easy installation, and a U-shaped part is arranged for initial positioning to save installation time, The middle voltage code is provided with Non-slip pattern, so that the locking is firmer, C-Beam Linear Rail the fixed bolt's rectangular head is provided with a finite bit slot to prevent the fixed bolt from slipping away from the guide rail, the locking device position can be arbitrarily adjusted on the guideway, the installation is convenient and efficient, the installation efficiency is high, and the

C-Beam Guide is the carrier of trolley. Curved segments with a straight segment and a radius greater than 500 mm, straight segment unit length

4 meters (or 6 meters), through the coupling can extend elongation.

It consists of a flat cable, a four-luntai vehicle for carrying cables and three main parts of the guide rolling. The flat cable adopts the non fuel-burning material, C-Beam Linear Rail which can be used in the indoor and outdoor and contact with the oil, has certain weather resistance, and the round cable has the advantages of small bending radius and long life.

The C-Beam guide adopts a cold drawing of cold rolled steel plate to ensure the accuracy of the dimension of the track section. Instead of angle steel and other conductive methods of unsafe, large weight, C-Beam Linear Rail indoor sliding line ash, outdoor icing caused by short lines, the impact of the use of the shortcomings, more unique domestic characteristics, track unit length 4~6m using coupler connector, can be extended to any length.

Previous:High Precision Bearing Rotation Next:Linear Guide To Improve The Sensitivity Of The System